|
|
Compact 12" subwoofer with 300 W RMS power 12" Subwoofer mit 600 Watt Leistung High-pressure bass support for all top speakers Powerful, dry bass via voluminous housing and bass-reflex tubes Dry bass, even at h... - TILBUD NU, pris kun 999,00 (før 1199,00)
The SL712 from DD Audio is a 12 inch Subwoofer with a power handling of 1000 watts RMS. It features a 3 inch voice coil and operates in a frequency range of 30 to 300 Hz. The construction includes rigid low-mass cones, dual-layer spiders, and highly compressed EROM surrounds. The model is available in impedance variants D2 and D4. Additional features include flat cast frames and high-efficiency motors. The mounting depth is 140 mm with a motor diameter of 170 mm. Features 12 inch (30cm) Subwoofer Power: 1000 watts RMS Impedance: D2 or D4 3 inch voice coil Frequency range: 30 to 300 Hz Rigid, lightweight cones Dual-layer spiders Highly compressed EROM surrounds Flat cast frames High-efficiency motors Technical specifications Diaphragm diameter: 304.8 mm Fs: 29 Hz Qms: 5.4 Qes: 0.62 Qts: 0.54 Vas: 39.2 liters Xmech: 40 mm Xmax: 19 mm Frame outer diameter: 314 mm Frame outer diameter with gasket: 318 mm Mounting diameter: 289 mm Mounting depth: 140 mm Motor diameter: 170 mm Motor depth: 63.5 mm Woofer displacement: 2 liters Closed enclosure: 19.8 – 42.5 liters Open enclosure: 28.3 – 50 liters
The Apocalypse ASA-1500.2 is a 2-Channel Amplifier from Deaf Bonce in Class D design with a frequency range of 10 to 20,000 Hz. The RMS power is 1500 W x 2 at 1 Ohm, 890 W x 2 at 2 Ohm, and 550 W x 2 at 4 Ohm. In bridged mode, it delivers 3020 W x 1 at 2 Ohm and 1780 W x 1 at 4 Ohm. The minimum load impedance is 1 Ohm per channel, and 2 Ohm in bridged mode. The input sensitivity ranges from 0.2 to 6 V, the Crossover operates at 12 dB/Oct, and simultaneous LPF and HPF switching is possible. Damping factor ≥ 175 and Signal/Noise ≥ 91 dB. The operating voltage is 9 to 15 V. Dimensions are 240.0 x 380.0 x 63.5 mm, power connections 50 mm², speaker connections 10 mm², weight with packaging 6.20 kg. Features 2-Channel Amplifier Class D Frequency range 10 to 20,000 Hz Simultaneous LPF and HPF switching Crossover 12 dB/Oct Operating voltage 9 to 15 V Power connections 50 mm² Speaker connections 10 mm² Dimensions (LxWxH) 240.0 x 380.0 x 63.5 mm Weight with packaging 6.20 kg Accessories: Amplifier, remote control, mounting kit, manual, warranty card Technical Specifications Model: ASA-1500.2 Number of channels: 2 RMS power @ 1 Ohm (14.4 V): 1500 W x 2 RMS power @ 2 Ohm (14.4 V): 890 W x 2 RMS power @ 4 Ohm (14.4 V): 550 W x 2 RMS power at 2 Ohm (Bridge): 3020 W x 1 RMS power @ 4 Ohm (Bridge): 1780 W x 1 Minimum load impedance per channel: 1 Ohm Minimum load impedance in bridged mode: 2 Ohm Input sensitivity: 0.2 to 6 V Damping factor: ≥ 175 Signal/Noise: ≥ 91 dB
The DSX6.2E from Crunch is a 6.5 inch Speaker Set with sturdy steel baskets in a flat design. The construction uses an internal magnetic drive and polypropylene membranes. The system features 25 mm voice coils and adjustable Tweeters for individual customization. The power handling is rated at 100 Watts RMS and 200 Watts MAX. The impedance of the set is 4 Ohms with a frequency range of 65 to 22000 Hz. Compact cable crossovers and robust Speaker Grilles are included. The cutout diameter is 145 mm with a mounting depth of 45 mm. Features 6.5 inch (16.5 cm) Speaker Set Power handling: 100 Watts RMS Power handling: 200 Watts MAX Sturdy steel baskets in flat design Internal magnetic drive Polypropylene membranes 25 mm voice coils Robust Speaker Grilles Adjustable Tweeters Compact cable crossovers Impedance: 4 Ohms Technical Specifications 2 x 165 mm mid-bass drivers 4 x 12 dB cable crossovers 2 x 25 mm fabric neodymium Tweeters Frequency range: 65 - 22000 Hz Cutout diameter: 145 mm Mounting depth: 45 mm
Discover the Rotterdam 600DAB, a 2-DIN car radio from Blaupunkt that impresses with a variety of features. This multimedia system offers both analogue and digital radio functions and is equipped with a powerful media player that supports all common audio and video formats. A special highlight is the integrated rear view camera function. In addition, the device enables the use of Apple Car Play and Android Auto, which makes navigation, internet radio and many other apps possible without any problems. Thanks to Bluetooth connection, the car radio also stands out for easy telephony and audio streaming. Equipped with a high-resolution TFT display, the Rotterdam 600DAB forms a reliable interface between you and your digital world. highlights analog / digital radio FM, AM, DAB, DAB+ tuner with PS, AF, REG, RT, CT, TA, DLS media player USB, AV, Bluetooth MP3, FLAC, OGG, WMA, WAV, MKV, AVI Support rear view camera function Apple Car Play Navigation, Internet radio, music player, apps, voice assistant Android Auto Navigation, Internet radio, music player, apps, voice assistant Bluetooth Telephony, phone book access, list access and audio streaming with title display sound Digital Signal Processing 8-band equalizer + sound presets 4-channel preamplifier output + sub-out 4 × 45 watts Generally High Resolution TFT Display DIM function Direct access to all audio sources Permanent storage steering wheel remote control input (SWC) Short installation depth Technical data system User interface: Graphical Blaupunkt user interface Permanent memory: Yes (settings, radio presets etc.) display Technology: LED backlight TFT Screen size: 7″ Resolution: 1024 × 600 pixels Touchscreen: Yes Display off: Yes Clock / Date display: Yes Clock display: 24 / 12 hours Radio system languages: English, German, French, Italian, Dutch, Swedish, Polish, Portuguese, Czech analog radio Tuner type: High-End CODEM IV World tuner (switchable): No Waveband: FM, AM Radio Data System (RDS): AF,PS, TA, TP, REG Travelstore: No Tape Scan / Preset Scan: No / Yes Search by frequency: Yes Selection via frequency scale: Yes Station memory (presets): 18 FM / 12 AM Frequency response (Hz) -3dB: 60 –15.000 Digital Radio DAB+ integrated: Yes DAB Band III / L-Band: Yes / No Service Update: Yes Manual ensemble search: No Station memory (presets): 18 Ensemble Browsing: No Station Browsing: Yes Tape Scan / Preset Scan: Yes / No Service link DAB-FM: No Radio Text: Yes Program Type (PTY): No DLS (Dynamic Label Segment): Yes Slideshow: Yes smartphone connection Apple CarPlay: Yes (via rear USB) Android Auto: Yes (via rear USB) Bluetooth Supported version: Bluetooth 5.0 Supported profiles: HFP, PBAP, A2DP, AVRCP, HSP Pairing (number of devices): 6 Hands-free: Yes Language selection: No Main functions: Accept/End...
Masori G8-8 Mercedes GLK is a Mercedes Subwoofer Enclosure. Made from MDF and manufactured in Poland. Designed for 8 inch/20 cm subwoofers. Sealed enclosure with a volume of 8 liters. Mounting hole diameter 182 mm and cutout diameter 222 mm. Maximum installation depth 180 mm and maximum magnet diameter 130 mm. Color Black, weight 3.30 kg. With individually selectable speaker parameters and custom design. Features Mercedes Subwoofer Enclosure custom-made Material MDF Color Black Speaker size 8 inch/20 cm Construction type sealed Enclosure volume 8 liters individually selectable speaker parameters manufactured in Poland Technical Specifications Mounting hole diameter 182 mm Cutout diameter 222 mm maximum installation depth 180 mm maximum magnet diameter 130 mm weight 3.30 kg
The Rage 12 V3 D1 is a 12-inch (30 cm) Subwoofer from B2 Audio in version 3 with significantly enhanced drive and lower resonance frequency. The frequency response ranges from 10 Hz to 500 Hz, with a sensitivity of 91.2 dB. The nominal impedance is Dual 1 Ohm. The power handling is 2000 Watts, with a dynamic peak power of 4000 Watts. The resonance frequency is 29.5 Hz, the voice coil diameter is 76.2 mm, and the XMAX (one way) is 20 mm. The outer diameter is 311 mm, the cutout diameter is 282 mm, and the mounting depth is 225 mm. Recommended enclosures: sealed 30 liters (QTC 0.451) and bass reflex 40 liters with a 10 cm aeroport and 35 cm length (FB 42 Hz). Features 12-inch (30 cm) Subwoofer Manufacturer: B2 Audio Version 3 with enhanced drive and lower resonance frequency Nominal impedance: Dual 1 Ohm Power handling: 2000 Watts Dynamic peak power: 4000 Watts Sensitivity: 91.2 dB Frequency response: 10 Hz to 500 Hz XMAX (one way): 20 mm Voice coil diameter: 76.2 mm Outer diameter: 311 mm Cutout diameter: 282 mm Mounting depth: 225 mm Sealed enclosure recommendation: 30 liters (QTC 0.451) Bass reflex enclosure recommendation: 40 liters, 10 cm aeroport, 35 cm length (FB 42 Hz) Technical Specifications Resonance frequency (FS): 29.5 Hz DC resistance (RE): 1 Ohm QMS: 5.19 QES: 0.44 QTS: 0.4 VAS: 29.4 liters CMS: 80 µm/N SD: 523.1 cm² MMS: 334.6 g BL: 151.38
The 10W1V3-2 is a compact 10" Subwoofer from JL Audio, characterized by its shallow mounting depth of 117 mm and a power handling capability of 300W at 2 Ohm. It is ideal for applications with spatial constraints, delivers impressive bass output, and is optimized for use in compact, sealed enclosures. With JL Audio's proprietary technologies, it offers outstanding performance and reliability. Features Shallow mounting depth: 117 mm Power handling capability: 300 Watts RMS Nominal impedance: 2 Ohm Optimized for compact, sealed enclosures JL Audio proprietary technologies Specifications Nominal diameter: 250 mm / 10.0 inches Overall diameter: 267 mm / 10.5 inches Mounting diameter: 230 mm / 9.0625 inches Volume (Net Int.) for sealed enclosure: 0.55 cu ft / 15.57 L Volume (Net Int.) for bass reflex enclosure: 0.9 cu ft / 25.5 L Recommended amplifier power: 75 - 300 Watts RMS Mounting diameter: 230 mm / 9.0625 inches Sensitivity (1 W / 1 m): 83.9 dB SPL Resonance frequency (Fs): 25.23 Hz Displacement: 0.037 cu ft / 1.05 L
The M 08 Evo 2 BR from Audio System is an Enclosed Subwoofer with a size of 8 inches and a 15-liter bass reflex enclosure. The enclosure construction is made of high-strength MDF and includes a 33 mm thick double front panel. The model has an impedance of 4 ohms and achieves a nominal power of 200 watts RMS as well as a maximum power of 300 watts. The design features a carbon look. The dimensions are 370 mm in length and 280 mm in height, while the depth varies between 210 mm and 310 mm. Features 8 inches (20cm) Enclosed Subwoofer 15 liters bass reflex enclosure M08 EVO2 with carbon look High-strength MDF enclosure 33 mm double front panel Impedance: 4 ohms Power: 200 watts RMS Power: 300 watts max. Technical Specifications Length: 370 mm Height: 280 mm Front depth: 210 mm Rear depth: 310 mm
The Apocalypse DB-SA 255 is a 15-inch (38 cm) Subwoofer from Deaf Bonce. It delivers 1000 W RMS power and 2000 W peak power. It features a 63.5 mm copper voice coil. The construction includes an aluminum frame, a ferrite magnet, a paper cone, and a foam surround. The impedance variants 1+1 Ohm and 2+2 Ohm are available as DB-SA255D1 and DB-SA255D2, respectively. Specified values: SPL 87.10 / 87.50 dB, Fs 32.20 / 32.86 Hz, Qts 0.51 / 0.55, BL 20.12 / 20.83, Vas 61.30 / 62.10 L. Xmax is ±15.00 mm; installation depth is 187.9 mm, cutout size is 358.0 mm, and gross weight is 13.60 kg. Features 15-inch Subwoofer (38 cm) RMS power: 1000 W Peak power: 2000 W Impedance: 1+1 / 2+2 Ohm Voice coil: 63.5 mm, copper Cone: paper Magnet: ferrite Surround: foam Frame: aluminum Installation depth: 187.9 mm Cutout size: 358.0 mm Gross weight: 13.60 kg Technical Specifications Model: Deaf Bonce DB-SA255D1 / DB-SA255D2 SPL: 87.10 / 87.50 dB Fs: 32.20 / 32.86 Hz Qts: 0.51 / 0.55 BL: 20.12 / 20.83 Vas: 61.30 / 62.10 L Xmax (+/-): 15.00 mm
The Silver 6500 15 inch from GS Audio is a 15 inch Subwoofer with a maximum load capacity of 6500 Watts and an RMS power of 3250 Watts. The model features an aluminum die-cast basket and a carbon dustcap / diaphragm. Equipped with a 3 inch voice coil (76 mm), Nomex spider, and push terminals up to 16 mm². Available impedance variants D1 or D2. Dimensions: outer diameter 390 mm, cutout diameter 354 mm, mounting depth 255 mm, total depth 285 mm, magnet diameter 225 mm. Features 15 inch (38 cm) Subwoofer Maximum load capacity 6500 Watts RMS power 3250 Watts Aluminum die-cast basket Carbon dustcap / diaphragm 3 inch voice coil (76 mm) Nomex spider Push terminals up to 16 mm² Technical Specifications Impedance D1 / D2 Outer diameter 390 mm Cutout diameter 354 mm Mounting depth 255 mm Total depth 285 mm Magnet diameter 225 mm
The HED Series H752 from Cerwin Vega is a 5-inch coaxial speaker with a 133 mm 2-way design. The RMS power handling is rated at 40 watts, and the maximum power handling is specified at 275 watts. The speaker features a vented frame made of stamped steel. For the diaphragm, a reinforced, graphite-injected, and spun cone is used. A linearly woven, treated red spider is part of the internal construction. Additionally, a 25 mm symmetrical PEI dome made of black polypropylene is installed. Features 5-inch (13 cm) coaxial speaker 133 mm 2-way design Power handling: 40 watts RMS Power handling: 275 watts Max Vented frame made of stamped steel Reinforced, graphite-injected, spun cone Linearly woven, treated red spider 25 mm symmetrical PEI dome made of black polypropylene
The ESX Quantum QXE52 is a 5-inch (13 cm) coaxial speaker with a 2-way design and a composite diaphragm made of polypropylene-carbon. The rated power is 80 watts RMS, with a maximum power of 160 watts, at 4 Ω impedance. The frequency range is 62 - 22000 Hz. Equipped with 25 mm voice coils and a 0.36 kg magnet driver. The 20 mm silk dome neodymium tweeter is integrated. The installation depth is 54 mm, and the installation diameter is 115 mm; a protective grille is included. Features 5-inch (13 cm) coaxial speaker 2-way coaxial speaker Composite diaphragm made of polypropylene-carbon 20 mm silk dome neodymium tweeter Protective grille Technical Specifications Rated power 80 watts RMS Maximum power 160 watts Impedance 4 Ω Frequency range 62 - 22000 Hz 25 mm voice coils Magnet driver 0.36 kg Installation depth 54 mm Installation diameter 115 mm
The CRB501 from Crunch is a 12-inch Enclosed Subwoofer with a power handling of 500 Watts RMS and 1000 Watts MAX. The system features a 30 cm aluminum die-cast subwoofer and a 64 mm voice coil with an impedance of 4 Ohm. The enclosure construction is equipped with an acrylic glass window and multi-colored logo sticks. For visual design, a white interior lighting and a blue magnet lighting are integrated. The sound pressure level reaches values of up to 144 dB. The outer dimensions of the enclosure are 60 x 38 x 45/32 cm. Features 12-inch (30 cm) Enclosed Subwoofer 30 cm aluminum die-cast subwoofer 64 mm voice coil Sturdy enclosure with acrylic glass window White interior lighting Blue magnet lighting Multi-colored logo sticks Dimensions: 600 x 380 x 450/320 mm Technical Specifications Power handling: 500 Watts RMS Power handling: 1000 Watts MAX Impedance: 4 Ohm Maximum sound pressure level: 144 dB
The Prime R152-S from Rockford Fosgate is a 5-inch 2-way component system with a nominal impedance of 4 Ohms. The power handling of the Speaker Set is 40 Watts RMS with a maximum power of 80 Watts. The midrange driver features a polypropylene diaphragm with mica injection and a foam surround. The Tweeter is designed as a 13 mm Mylar dome and has an inline crossover with a high pass of 12 kHz at 6 dB per octave. The set is sold in pairs, including mounting materials and grilles. The installation of the Tweeter can be flush, surface, or angled. Features 5-inch (13 cm) Speaker Set Product Type: Component System Power: 40 Watts RMS Power: 80 Watts Max Mica-injected polypropylene diaphragm 13 mm Mylar dome Foam surround Inline crossover Sold in pairs (2 pieces) Technical Specifications Midrange driver size: 133.3 mm Midrange driver mounting depth: 48.5 mm Tweeter nominal diameter: 25.4 mm Tweeter mounting depth: 26.88 mm Nominal impedance: 4 Ohms Sensitivity: 85 dB @ 1W/1M Frequency response: 58 Hz - 20 kHz Tweeter high pass (HP): 12 kHz @ 6 dB/octave
The GTI6.2T Dome Tweeters from Crunch consist of two 25 mm textile neodymium units. The power handling is rated at 100 Watts RMS and 200 Watts MAX. The system features two 12 dB cable crossovers and has an impedance of 4 Ohms. The covered frequency range is between 3000 and 22000 Hz. For integration, a mounting hole of 45 mm and a mounting depth of 16.5 mm are required. Features Product Type: Dome Tweeter Manufacturer: Crunch 2 x 25 mm textile neodymium tweeters 2 x 12 dB cable crossover Power Handling: 100 Watts RMS Power Handling: 200 Watts MAX Impedance: 4 Ohms Technical Specifications Frequency Range: 3000 - 22000 Hz Mounting Hole: 45 mm Mounting Depth: 16.5 mm
The C1-100CT from JL Audio is a high-quality 1.0-inch aluminum dome tweeter, designed for precise and detailed high-frequency reproduction from 3.6 to 22 kHz. Equipped with a silk suspension and a robust protection circuit, these tweeters ensure durability and excellent sound quality. They offer flexible mounting options for easy installation in any vehicle. Features 1.0-inch (25 mm) aluminum dome tweeter Frequency range: 3.6 - 22 kHz Flush and surface mount installation Tweeter protection circuit built-in Inline and outboard high-pass filter, 12 dB/octave Sold in pairs with mounting hardware and grilles Technical Specifications Power handling (RMS): 60 W Recommended amplifier power (RMS): 20 - 60 W per channel System efficiency: 91.5 dB at 1 W / 1 m System nominal impedance: 4 Ω Dimensions of flush mount bracket: Diameter 50 mm Surface mount bracket: Diameter 51 mm Flush mount installation depth: 10 mm Dimensions of crossover: 50 mm (width), 34 mm (depth), 23 mm (height)
Morel Virtus Nano Carbon Integra 62 is a 6.5 inch 2-way coaxial speaker. With a mounting depth of 17 mm, the Virtus Nano Carbon Integra is considered the thinnest car audio coaxial speaker in the world. The Midbass uses a dome-shaped carbon fiber diaphragm, EVC drive technology, a neodymium magnet, a 2.1 inch voice coil, and a CAR-Filter. The high frequencies are handled by a 28 mm ACUFLEX MT120N Tweeter, centrally located in the Midbass. Power 100 Watts RMS and 3000 W Max. Sensitivity 87 dB SPL (2.83V/1m), impedance 4 Ω, frequency range 50 - 22000 Hz. Options for frequency adjustment with Tweeter +/-2 dB and including frequency switch. Including grille. Price per set. Features 6.5 inch 2-way coaxial speaker 100 Watts RMS 3000 W Max 4 Ω impedance 87 dB sensitivity SPL 2.83V/1m Frequency range 50 - 22000 Hz Mounting depth of the Midbass 17 mm Diameter of the Midbass 100 mm Dome-shaped carbon fiber diaphragm EVC drive technology Neodymium Magnet 2.1 inch voice coil 28 mm ACUFLEX MT120N Tweeter Tweeter centrally located in the Midbass CAR-Filter Including frequency switch Frequency adjustment Tweeter +/-2 dB Including grille Price per set Technical specifications Nominal diameter 165 mm Voice coil 53.34 mm diameter Mounting depth 17 mm Diameter Midbass 100 mm Diaphragm diameter Tweeter 28 mm Sensitivity 87 dB SPL 2.83V/1m Impedance 4 Ω Frequency range 50 - 22000 Hz Crossover MXR 250.4i included ACUFLEX MT120N Tweeter EVC drive technology Neodymium Magnet CAR-Filter
The HO110W6V3 is a 10" Enclosed Subwoofer from JL Audio that offers an unparalleled bass experience. Equipped with a 10W6v3-D4 Subwoofer and an HO Wedge bass reflex enclosure, it provides a continuous power handling of 600W at 2 Ω. Its compact design, made from CNC-cut MDF and high-quality carpet, ensures an elegant look and easy installation. Features 10" Enclosed Subwoofer with 10W6v3-D4 Subwoofer 600W continuous power handling, 2 Ω nominal impedance HO Wedge bass reflex enclosure CNC-cut MDF, dark gray/black carpet Chamber-coupled port design for optimal performance Wired and ready to connect with five-way binding post terminal Specifications Continuous power handling: 600 W RMS Nominal impedance: 2 Ω Enclosure type: Chamber-coupled, slot port Dimensions: Width 308 mm, Height 356 mm, Depth 552 mm Net weight: 21.7 kg Recommended amplifier power: 200 - 600W
The Zeus Expansion ZXR700/2E from Hifonics is a 2-Channel Amplifier based on Class D technology. The device features 1-ohm stability and utilizes an Infinion chipset. It includes aluminum die-cast side panels and a blue illuminated logo panel. The high-level inputs are equipped with the Error Protection System (EPS). The amplifier is start/stop ready and has an automatic turn-on function as well as Interference Free Technology (IFT). The dimensions are 150 x 50 x 273 mm. A compact bass level remote control is included. Features 2-Channel Amplifier Class D Digital Technology 1-ohm Stability Infinion Chipset Aluminum Die-Cast Side Panels High-Level Inputs with EPS (Error Protection System) Automatic Turn-On Function Start/Stop Ready IFT (Interference Free Technology, EMC tested) Blue Illuminated Logo Panel Compact Bass Level Remote Control RCA Inputs and Outputs Technical Specifications Power: 2 x 125 W/RMS @ 4 Ω Power: 2 x 250 W/RMS @ 2 Ω Power: 2 x 350 W/RMS @ 1 Ω Power: 1 x 500 W/RMS @ 4 Ω bridged Power: 1 x 700 W/RMS @ 2 Ω bridged HPF/LPF Range: 50 - 5000 Hz Bass Boost: 0 - 12 dB Dimensions: 150 x 50 x 273 mm
Radioactive GZRW 38-D2 is a 15-inch (38 cm) Subwoofer from Ground Zero. Design features a reinforced paper cone, long-stroke sandwich surround, and resonance-optimized steel basket. Driven by a 75 mm copper voice coil with polycot centering. Front with IMPP dust cap and 3D logo. Klippel-optimized. Electrical specifications: Impedance 2x 2 Ohm, RMS power handling 1000 Watts, power recommendation 800–1400 Watts, efficiency 85.8 dB. Mechanical specifications: Xmax 50 mm, cutout diameter 359 mm, mounting depth 195 mm. Thiele/Small parameters: Fs 22.9 Hz, Qts 0.50, Vas 110.4 liters. Features 15-inch (38 cm) Subwoofer Klippel-optimized Reinforced paper cone Long-stroke sandwich surround Resonance-optimized steel basket 75 mm copper voice coil Polycot centering IMPP dust cap with 3D logo Technical Specifications Diameter 38 cm RMS power handling 1000 Watts Impedance 2x 2 Ohm Efficiency 85.8 dB Power recommendation 800–1400 Watts Voice coil 75 mm copper Max. excursion Xmax 50 mm Cutout diameter 359 mm Mounting depth 195 mm Resonance frequency Fs 22.9 Hz Total Q factor Qts 0.50 Equivalent air volume Vas 110.4 liters
Discover the Alpine SWG-1044, a 10" (25cm) subwoofer that impresses with its peak power of 500W and an RMS power rating of 150W. With a frequency range of 30Hz to 1kHz and a sensitivity of 88.4dB/W/m, this subwoofer delivers powerful sound. The 235mm mounting diameter and 139mm depth make it versatile. Features 10" (25cm) Subwoofer Peak power: 500W RMS power: 150W Frequency range: 30Hz - 1kHz Sensitivity: 88.4dB/W/m Mounting diameter: 235mm Depth: 139mm
The BZN8 is a unique Subwoofer designed by Steg specifically for the Mercedes C-Class (206). This sturdy Subwoofer impresses with its robust plastic basket and a fiberglass membrane that ensures an impressive load capacity of 100 Watts RMS. Note that operating a pair (L+R) requires an additional amplifier. With an impedance of 2.0 Ohms and its compact 20cm size, the BZN8 becomes the optimal companion for any musical experience in your vehicle. Features 20cm footwell Subwoofer left and right suitable for: C-Class (206) Plastic basket Fiberglass membrane Load capacity 100 Watts RMS Impedance 2.0 Ohms 1 pair (L+R) operation requires an additional amplifier!
With the Elate Carbon Pro 53 3-way 5-inch speaker set, Morel sets the performance bar at a level that has established itself as unrivaled by combining first-class power handling and musicality. The Pro variants are highlighted by the new high-resolution Elate Alto Cavity-Back silk dome tweeter. The new Elate Carbon woofers feature 3-inch voice coils and KLIPPEL-optimized EVC motors and carbon fiber/ROHACELL sandwich cones for extremely low distortion, even at the highest volumes. The 3-way systems receive the new Elate MM3 3.5-inch dome midrange driver, which offers a wider usable frequency range than its predecessor and drastically improves the system's performance. The new Elate Carbon Pro set is made for people who want to enjoy every aspect of music to the fullest. The style of the iconic Lotus-design speaker grilles from Morel alone will take your breath away, and then there's the sound... The 3-way Elate Carbon Pro 53 system, in the active version, includes a 5-1/4-inch woofer, a 3-inch midrange driver, and the Elate Alto 1.1-inch tweeter, which is not included in the Elate Carbon systems without Pro. Both the midrange and woofer use a carbon fiber/Rohacell cone that minimizes distortion, allowing for the most precise sound possible. And for the Elate Alto tweeter, Morel uses the Cavity-Back technology developed for the Supremo Piccolo tweeter to achieve amazing highs. Features 3-way component speaker system Includes two woofers, two midrange drivers, and two tweeters 5-1/4 inch 3-layer carbon fiber/Rohacell woofer cone with butyl rubber surround 3" midrange driver made of 3-layer carbon fiber/Rohacell 1.1" Elate Carbon Alto Acuflex-coated silk dome tweeter Optional: 2 crossovers in the passive version Aluminum die-cast basket Power handling up to 160 watts RMS Frequency response: 40-25,000 Hz Sensitivity: 85 dB at 2.83 V Woofer mounting depth: 6 cm Woofer cutout diameter: 12.22 cm Midrange mounting depth: 3.9 cm Midrange cutout diameter: 8.2 cm Includes grilles Scope of delivery Optional: 2 crossovers in the passive version 2 MW5 woofers 2 MM3 midrange drivers 2 Alto tweeters (with included 7" speaker cable) 2 woofer grilles 2 midrange grilles 2 midrange grille frames 2 tweeter grilles (installed) Eight 1-1/4 inch screws Fourteen 3/4 inch screws 18 quick-release clips Putty for the grille Eight 0.25 inch crimp-on quick connectors Four 0.110 inch crimp quick connectors Installation manual Warranty card
The BA1TW-V4 from Vibe is a Dome Tweeter from the BlackAir series. It features a 38 mm silk dome for sound reproduction. The RMS power is rated at 60 watts, while the peak power is 180 watts. The system has an impedance of 4 Ohm. A passive Crossover is already integrated into the device. The construction allows for both flush and surface mounting. The usable frequency range extends from 1,500 Hz to 20,000 Hz. The sensitivity of the tweeter is 95 dB. Features Dome Tweeter BlackAir series 38 mm silk dome Integrated passive Crossover Flush and surface mounting possible Technical Specifications RMS power: 60 watts Peak power: 180 watts Impedance: 4 Ohm Frequency range: 1,500 Hz - 20,000 Hz Sensitivity: 95 dB
Zeus ZSPL12DUAL is a 12-inch Enclosed Subwoofer from Hifonics. It features a Dual Bass Reflex System and two 30 cm ZSPL12D2 Subwoofers. Nominal impedance 4 + 4 Ohm with 4 Ohm per terminal. Frequency range 30–300 Hz. Power handling 1200 Watts RMS, 2400 Watts Music, and 3600 Watts Peak. Recommended amplifier power 1200–1800 Watts RMS. Dimensions 900 x 372 x 476/376 mm. Features 12-inch Enclosed Subwoofer Dual Bass Reflex System Subwoofer: 2 x 30 cm ZSPL12D2 Dimensions: 900 x 372 x 476/376 mm Technical Specifications Nominal impedance: 4 + 4 Ohm (4 Ohm per terminal) Frequency range: 30–300 Hz Power handling RMS: 1200 Watts Power handling Music: 2400 Watts Power handling Peak: 3600 Watts Recommended amplifier power: 1200–1800 Watts RMS
The Fortissimo FF2.5 is a Full-Range Speaker made in Italy with an outer diameter of 78 mm or 2.5 inches and an impedance of 4 Ohms. The technical design includes a specially black-coated fiberglass diaphragm as well as a conical fiberglass dust cap. This dust cap is directly glued to the 20 mm aluminum voice coil. A neodymium magnet with a copper cap on the pole core and a damped pole core bore serves as the drive. The speaker is optimized for operation in FreeAir or closed enclosures starting from a volume of 0.2 liters. The nominal power handling is 60 Watts RMS when using a high-pass filter. The efficiency is 87.9 dB/2.83V/1m. Features Full-Range Speaker 2.5 inches (78 mm) diameter Power: 60 Watts RMS Impedance: 4 Ohms Black-coated fiberglass diaphragm Conical fiberglass dust cap 20 mm aluminum voice coil Neodymium magnet with copper cap Damped plastic basket Enclosure recommendation: Closed 0.2 liters to 0.4 liters Alternative: Bass reflex 1.5 liters with 80 cm² port and 13 cm length Technical Specifications Efficiency: 87.9 dB/2.83V/1m Resonance frequency (fs): 140 Hz Total Q factor (Qts): 0.63 Equivalent volume (Vas): 0.5 liters Linear excursion: 1.5 mm per direction Outer diameter: 78 mm Mounting diameter: 69.0 mm Mounting depth: 25 mm
The VMAXS124 from Cerwin Vega is a 12-inch Subwoofer from the VMAX series with a nominal power handling of 400 Watts RMS and a peak power handling of 800 Watts. The model features a dual 4 Ohm impedance and a 76 mm high-temperature voice coil. The diaphragm is made of treated, semi-pressed cellulose and is attached with a rubber surround to a heavy-duty aluminum die-cast frame. The technical features include a Klippel DA-optimized motor and symmetrical suspension. The design includes an elevated motor structure, additional cooling vents for the voice coil, and a copper short circuit ring. The resonance frequency is 33.3 Hz with a sensitivity of 87.5 dB. Features 12-inch (30 cm) Subwoofer Dual 4 Ohm impedance Power handling: 400 Watts RMS Power handling: 800 Watts peak Treated, semi-pressed cellulose diaphragm Rubber surround Heavy-duty, industrial-grade aluminum die-cast frame Klippel DA-optimized motor and suspension symmetry Black-coated 76 mm high-temperature voice coil Elevated motor structure and cooling design Additional cooling vents for the voice coil Copper short circuit ring Oversized spider Oversized, polished, black chrome terminals Single stack magnet motor structure Technical Specifications Resonance frequency (Fs): 33.3 Hz Sensitivity: 87.5 dB Xmax: 9 mm Mounting depth: 92 mm Cutout diameter: 284 mm Recommended volume for sealed enclosures: 21.23 l Recommended volume for bass reflex enclosures: 35.39 l
The 13TW5V2-4 from JL Audio is a 12" (30cm) Flat Subwoofer that impresses with innovative Thin-Line technology. This allows for astonishing bass performance with minimal space requirements. The improved motor construction and increased linear excursion provide stability and excellent sound. Ideal for tight installations, it delivers optimal performance with an amplifier power of 250W to 600W in a compact enclosure. Features 12" (30cm) Flat Subwoofer Thin-Line subwoofer technology Versatile 4-ohm voice coil Optimized for small enclosures High mechanical stability and bass performance Recommended amplifier power: 250W - 600W Technical Specifications RMS power: 600 W Nominal diameter: 345 mm / 13.5 inches Recommended enclosure size: 0.80 cu ft / 22.66 L Mounting depth: 67 mm / 2.625 inches Net weight: 9.3 kg / 20.5 lb Fs: 27.61 Hz Xmax: 11 mm / 0.433 inches
The NBS210A from Nakamichi is a 10-inch active enclosure subwoofer with a rated power of 100 W. The model achieves a peak power of 1000 W and has a distortion of less than 0.1 percent. A signal-to-noise ratio of over 90 dB and a frequency response of 40 Hz to 160 Hz characterize the technical parameters. The design is compact with dimensions of 300 x 275 x 318 mm. A fixed subsonic filter at 20 Hz is integrated. The package includes a remote control, a user manual, a cable tie, and a 20 A fuse. Features 10-inch (25 cm) active enclosure subwoofer Rated power: 100 W Peak power: 1000 W Dimensions: 300 x 275 x 318 mm Subsonic filter: 20 Hz (fixed) Package includes: NBS210A, remote control, user manual, cable tie, fuse (20 A) Technical Specifications Distortion (THD): 90 dB Frequency response: 40 Hz - 160 Hz Input sensitivity: 0.5 - 280 mV Fuse rating: 20 A Net weight: approx. 7.2 kg
The Audiocontrol ACM-2.300 is a 2-channel amplifier that is an integral part of the Audiocontrol range and is known for its robustness and functionality. This micro amplifier from the popular ACM series offers a perfect harmony of power and performance, which can be flexibly used in car audio systems of various intensities. With its compact size and high power, it integrates seamlessly into existing stereo systems, providing the perfect sound in any setting. Additionally, reversible cover plates allow for versatile mounting options, whether in combination with AudioControl processors from the DM series or when using multiple ACM series amplifiers in tight spaces. Technical Data 2 x 150 Watts at 2 Ohms 2 x 75 Watts at 4 Ohms 300 Watts bridged at 4 Ohms GTOTM Signal Sense Active speaker-level inputs for OEM integration RCA Line Inputs Linkwitz-Riley crossover Reversible cover plate ENTRANCES Preamp inputs: 2 balanced Preamplifier input voltage range: 500 mV - 6 Vrms Speaker level inputs: 2 Speaker level input voltage range: 3 V - 40 Vrms EXITS Continuous (RMS) rated power at 14.4 V: 4 Ω - 75 W x 2 RMS 2 Ω - 150 W x 2 RMS Bridged 4 Ω - 300 W RMS performance capability Frequency response: 10 Hz - 22 kHz Noise level: 102 dBA, Ref 50 W @ 4 Ohm THD+N: < 0.01% Current/Ground wire thickness: 20mm² Protection value: 1 x 30 A Crossover: 12 dB/octave Linkwitz-Riley, 80 Hz, 120 Hz, Bypass PFM Subsonic Filter: 32 Hz WEIGHT & DIMENSIONS Dimensions: 23.8 x 7.6 x 4.4cm Weight: 0.95 kg
The Street EDSPRO22T-E3 from EDGE is a Horn Tweeter equipped with high sensitivity and a smooth Power Bullet phase plug. It features a premium titanium diaphragm and a CNC-machined horn design. With a sensitivity of 106 dB and an OFC high power voice coil, this Pro Audio Tweeter delivers impressive sound quality. The speaker size is 2.2" (58 mm) and it achieves an RMS power of 115 watts as well as a peak power of 230 watts. The frequency range is between 2 kHz and 20 kHz, with an impedance of 4 Ohm. With a mounting depth of 1.3" (39 mm) and a mounting diameter of 43 mm, it is versatile for use. Features High Sensitivity Smooth Power Bullet Phase Plug Premium Titanium Diaphragm CNC-Machined Horn Design 106 dB Sensitivity OFC High Power Voice Coil Type: Pro Audio Tweeter Configuration: 1-Way Speaker Size: 2.2" (58 mm) RMS Power: 115 Watts Peak Power: 230 Watts Frequency Range: 2 kHz – 20 kHz Impedance: 4 Ohm Mounting Depth: 1.3" (39 mm) Mounting Diameter: 43 mm
The GTS52 5-inch coaxial speakers from Crunch feature sturdy steel baskets with a mounting depth of 50 mm. The system is equipped with a Y30 magnet drive and polypropylene membranes. It includes two 130 mm mid-bass drivers and a 13 mm textile neodymium tweeter. The power handling is rated at 75 watts RMS and 150 watts max. The impedance is 3 ohms with a frequency range of 65 to 22000 Hz. Robust speaker grilles are included in the package. The required mounting cutout is 117 mm. Features 5-inch (13 cm) coaxial speakers Sturdy steel baskets Y30 magnet drive Polypropylene membranes 13 mm textile neodymium tweeter Robust speaker grilles Power handling: 75 watts RMS Power handling: 150 watts MAX Technical Specifications 2 x 130 mm mid-bass drivers Impedance: 3 ohms Frequency range: 65 - 22000 Hz Mounting cutout: 117 mm Mounting depth: 50 mm
The Huracan 15000 21-inch Subwoofer from GS Audio features an RMS power handling of 7500 watts and a maximum power handling of 15000 watts. The construction includes a 107 mm large, 8-layer voice coil made of copper-coated aluminum (CCAW). A handcrafted combination of carbon fiber and Kevlar is used for the diaphragm material. For the electrical connections, 10 mm² cables are directly soldered to the driver. The model has a diameter of 21 inches, which is 53 cm. Features 21-inch (53 cm) Subwoofer Handcrafted carbon fiber and Kevlar diaphragm 107 mm large, 8-layer CCAW voice coil Directly soldered 10 mm² connection cables Power handling: 7500 watts RMS Power handling: 15000 watts MAX
Punch P2D2-10 / P2D4-10 is a 10-inch (25 cm) Subwoofer from Rockford Fosgate with 300 Watts RMS and 600 Watts maximum power. Available as D2 (2x2 Ohm) and D4 (2x4 Ohm) with dual voice coil, 57.15 mm voice coil, and Xmax 11 mm. The Kevlar fiber-reinforced paper cone works with VAST technology, which increases the cone area by up to 25 percent. StampCast basket with integrated spider ventilation, extended pole piece, and compact, ventilated back plate, as well as a protective, textured PVC magnet cover. 4 mm² nickel-plated push terminals and dual linear spider with embedded 16 AWG tinsel leads. Mounting depth 150.4 mm, cutout diameter 232 mm, displacement 1.7 liters, magnet weight 1.88 kg, diamond-cut aluminum die-cast ring with optional grille insert and shipping weight 6.16 kg. Features 10-inch Subwoofer Available as D2 2x2 Ohm and D4 2x4 Ohm Dual voice coil Kevlar fiber-reinforced paper cone VAST technology, cone area increased by up to 25 percent StampCast basket with integrated spider ventilation Dual linear spider with embedded 16 AWG tinsel leads 4 mm² nickel-plated push terminals High-temperature voice coil with spun Nomex reinforcement collar Extended pole piece and compact, ventilated back plate Protective, textured PVC magnet cover Diamond-cut aluminum die-cast ring, optional grille insert Technical Specifications Size: 10 inches 25 cm RMS Power: 300 Watts Max Power: 600 Watts Mounting Depth: 150.4 mm Cutout Diameter: 232 mm Voice Coil Diameter: 57.15 mm Magnet Weight: 1.88 kg Woofer Displacement: 1.7 liters Shipping Weight: 6.16 kg Xmax: 11 mm Sd: 360 cm² D2 2x2 Ohm: Nominal Impedance Dual 2 Ohm D2 2x2 Ohm: SPL dB @ 1W/1m: 84 D2 2x2 Ohm: Fs: 29 Hz D2 2x2 Ohm: Qes: 0.54 D2 2x2 Ohm: Qms: 7.00 D2 2x2 Ohm: Qts: 0.50 D2 2x2 Ohm: Le: 3.32 mH D2 2x2 Ohm: Re: 3.20 Ohm D2 2x2 Ohm: Volume: 35.4 liters D2 2x2 Ohm: Sealed Enclosure Volume Vb: 16.7 liters D2 2x2 Ohm: Bass Reflex Enclosure Volume Vb: 39.6 liters D4 2x4 Ohm: Nominal Impedance Dual 4 Ohm D4 2x4 Ohm: SPL dB @ 1W/1m: 84 D4 2x4 Ohm: Fs: 30.8 Hz D4 2x4 Ohm: Qes: 0.62 D4 2x4 Ohm: Qms: 7.00 D4 2x4 Ohm: Qts: 0.57 D4 2x4 Ohm: Le: 5.3 mH D4 2x4 Ohm: Re: 6.40 Ohm D4 2x4 Ohm: Vas: 35.4 liters D4 2x4 Ohm: Sealed Enclosure Volume Vb: 16.7 liters D4 2x4 Ohm: Bass Reflex Enclosure Volume Vb: 39.6 liters
The Machete MPT-17 N from Deaf Bonce are Dome Tweeters and currently the only Dome Tweeters in the Deaf Bonce portfolio. They have very small dimensions and a mounting depth of 20.8 mm. The efficiency is 95 dB, and the impedance is 4 Ohms. The RMS power is 25 W, with a maximum power of 50 W. The frequency response ranges from 2000 to 20000 Hz; usable from 2 kHz. The voice coil measures 25.4 mm, and neodymium is used as the magnet. The cutout size is 46.5 mm, and the gross weight is 0.30 kg. Features Dome Tweeter Neodymium Magnet Efficiency 95 dB Impedance 4 Ohms RMS Power 25 W Maximum Power 50 W Usable Frequency Range from 2000 Hz Technical Specifications Frequency Response 2000–20000 Hz Voice Coil 25.4 mm Mounting Depth 20.8 mm Cutout Size 46.5 mm Gross Weight 0.30 kg
The RS-SD1000.1D from Reiss Audio is a 1-Channel Amplifier with a mono-block Class-D topology. The device achieves an RMS power of 1000 W at an impedance of 1 Ohm. At 2 Ohms, the RMS power is 740 W, and at 4 Ohms, it is 440 W. The total harmonic distortion (THD) is below 0.3 percent. The S/N ratio is specified at over 90 dB. For sound adjustment, the amplifier features a gain range of 0.2 to 10 V and an adjustable subsonic filter from 50 to 250 Hz. An integrated bass boost allows for an increase of 0 to 18 dB. The frequency range of the amplifier extends from 20 to 500 Hz. Features 1-Channel Amplifier Mono-block, Class-D topology RMS power at 1 Ohm: 1000 W RMS power at 2 Ohms: 740 W RMS power at 4 Ohms: 440 W Bass boost: 0 – 18 dB Gain range: 0.2 – 10 V Subsonic filter: 50 – 250 Hz Technical Specifications Total Harmonic Distortion (THD): 90 dB Frequency range: 20 – 500 Hz Cross-over frequency (Octaveslope): 10 – 55 Hz
Punch P3-1X12 by Rockford Fosgate is a 12-inch (30 cm) Enclosed Subwoofer with a vented enclosure. The power handling is 600 Watts RMS, with a maximum power of 1200 Watts. The deep tuning allows for playback starting at 25 Hz. A Punch P3 (P3D2-12) is used as the woofer in 1x12 inch configuration. The nominal impedance is 1 Ohm. Speaker connection: 10 mm². The dimensions are 38.4 cm x 48.6 cm x 40 cm (H x W x D) and the weight is 25.8 kg. Features 12-inch (30 cm) Enclosed Subwoofer Enclosure type: vented Power handling: 600 Watts RMS Maximum power: 1200 Watts Tuning: deep, frequency response starting at 25 Hz Woofer: 1x Punch P3 (P3D2-12) Woofer size: 1x12 inch (30 cm) Nominal impedance: 1 Ohm Speaker connection: 10 mm² Technical Specifications Dimensions (H x W x D): 38.4 cm x 48.6 cm x 40 cm Weight: 25.8 kg
The W5-1138SMF is a compact 5 "(13cm) subwoofer, which comes from the renowned manufacturer Tang Band. This model is characterized by an impressive bass, which is made possible by a spacious XMAX of 9.25 mm. With features such as a width Rollsicke, increased flatter spider and large 4-layer vibration coil was designed for high resilience and excellent bass performance. Miniature-subwoofer drivers. Highlights Hooked vibration coil Strong ferrite magnetic structure Extremely low harmonious distortion Long -lived rubber thickness High resilience Very low Resonance frequency (FS) 45 Hz Characteristics 5 "(13cm) subwoofer Performance consumption (RMS) 40 watts Resilience (max) 80 watts Impedance 4 ohm Frequency response 45 to 1,500 Hz Sensitivity 82 dB 1W/1m Diameter of the vibration coil 1.25 " parameter Resonance frequency (FS) 45 Hz DC resistance (right) 3.4 Ohm Schwing coil inductance (LE) 0.34 mh Mechanical Q (QMS) 3.56 Electromagnetic Q (Qes) 0.57 Total Q (QTS) 0.49 Equivalence volume (VAS) 4.813l Mechanical flexibility of the suspension (CMS) 0.37 mm/n BL product (BL) 7.17 TM Diaphragma mass Inc. Air pollution (MMS) 28.81g Maximum linear deflection (Xmax) 9.25 mm Surface of the membrane (SD) 94 cm² Dimensions Total measurement diameter 155.95mm Tapping wall cutout in diameter 120.39mm Depth 93.21mm Montage holes 4 Housing recommendations Sealed volume 2.83l Sealed F3 73 Hz Ventilated volume 7.36l Ventilated F3 35 Hz
COM10 is a 10-inch (25 cm) Subwoofer enclosure from Masori. Made from 100% MDF with a wall thickness of 12 mm. Covered in dark gray felt. Equipped with integrated, gold-plated or chrome speaker terminals. Designed for 10-inch Subwoofers, sealed enclosure with a net volume of 20 liters. External dimensions: Width 325 mm, Height 315 mm, Depth 340 mm. Diameter of the mounting opening 232 mm and maximum installation depth 240 mm. Weight 5.00 kg. Features 10-inch (25 cm) Subwoofer enclosure Material: 100% MDF Wall thickness: 12 mm Cover: dark gray felt Speaker terminals: integrated, gold-plated or chrome Subwoofer size: 10-inch (25 cm) Design: sealed Weight: 5.00 kg Technical Specifications Net volume sealed: 20 liters Diameter of the mounting opening: 232 mm Maximum installation depth of the Subwoofer: 240 mm Width of the enclosure: 325 mm Height of the enclosure: 315 mm Depth of the enclosure: 340 mm
Discover the XP 1000.1, a high-quality 1-Channel Amplifier from Soundigital. This amplifier delivers impressive performance with up to 1000 W RMS at 1 Ω, ideal for demanding audio setups. With an operating voltage of 9 V to 16 V and a signal-to-noise ratio of 94 dB, it offers stable and clear sound quality. The frequency response ranges from 5 Hz to 25 kHz, complemented by a flexible crossover setup from 5 Hz to 500 Hz. Thanks to its compact dimensions, the XP 1000.1 can be easily integrated into various environments. Ideal for anyone who values performance and versatility. Technical specifications XP 1000.1 – 1 Ω Power at 1 Ω @ 4 Ω: 1 x 476 W RMS Power at 2 Ω: 1 x 721 W RMS Power at 1 Ω: 1 x 1000 W RMS Operating voltage: 9 V – 16 V Current draw (Music): 43 A Current draw (max.): 86 A Recommended Fuse (Music): 50 A Frequency response (-3 dB): 5 Hz – 25 kHz Signal-to-noise ratio (SNR): 94 dB HPF Crossover: 5 Hz – 40 Hz LPF Crossover: 50 Hz – 500 Hz THD + N (10% of rated power): 0.1% Recommended Battery: 50 Ah Power Cable: 16mm² Speaker cable: 4mm² Product dimensions: 16.8 x 13.6 x 5.6 cm Product dimensions: 42.7 x 34.5 x 5.6 cm XP 1000.1 – 2 Ω Power at 4 Ω: 1 x 739 W RMS Power at 2 Ω: 1 x 1000 W RMS Power at 1 Ω: n/a Operating voltage: 9 V – 16 V Current draw (Music): 45 A Current draw (max.): 90 A Recommended Fuse (Music): 50 A Frequency response (-3 dB): 5 Hz – 25 kHz Signal-to-noise ratio (SNR): 94 dB HPF Crossover: 5 Hz – 40 Hz LPF Crossover: 50 Hz – 500 Hz THD + N (10% of rated power): 0.1% Recommended Battery: 50 Ah Power Cable: 16mm² Speaker cable: 4mm² Product dimensions: 16.8 x 13.6 x 5.6 cm
The B815 is an 8 inches (20 cm) subwoofer enclosure from Masori. Made in the EU. Constructed from 18 mm MDF and covered with color-stable fabric in Black Melange. Bass reflex enclosure with a bass reflex opening of 55 mm / 120 mm. Enclosure volume of 15 liters. Mounting hole of 182 mm and diameter of the recess of 222 mm. Maximum installation depth of 150 mm. External dimensions 465 mm width, 225 mm height, 240 mm depth. Weight 7 kg. Features 8 inches (20 cm) Subwoofer Enclosure Material MDF 18 mm Color Black Melange Design Bass Reflex Bass Reflex Opening 55 mm / 120 mm Enclosure Volume 15 Liters Speaker Size 8 inches / 20 cm Maximum Installation Depth 150 mm Hole Diameter 182 mm Diameter of the Recess 222 mm Dimensions (W x H x D) 465 x 225 x 240 mm Weight 7 kg Made in the EU Covering Fabric color-stable Technical Data Material Thickness 18 mm MDF Width 465 mm Height 225 mm Depth 240 mm Diameter of the Mounting Hole 182 mm Diameter of the Recess 222 mm Maximum Installation Depth 150 mm Bass Reflex Opening 55 mm / 120 mm Enclosure Volume 15 Liters Weight 7 kg Color Black Melange
The FBskod11 from Masori is a 10-inch Subwoofer enclosure made from a robust MDF construction in the color Black Melange. It has been designed for installation in the Skoda Octavia 4 Liftback and features a housing volume of 19 liters. The construction is equipped with a damping paste to increase durability and improve acoustic qualities. The enclosure is designed for speakers with a diameter of 25 cm and weighs 5.8 kg. It accommodates subwoofers up to a depth of 175 mm and a maximum magnet diameter of 168 mm. The diameter of the mounting hole is 232 mm with a recess diameter of 275 mm. Features 10-inch (25 cm) Subwoofer enclosure Manufacturer: Masori Fits Skoda Octavia 4 Liftback Material: MDF Color: Black Melange Volume: 19 liters Weight: 5.8 kg Special feature: Damping paste for increased durability Technical Specifications Speaker size: 250 mm Mounting hole diameter: 232 mm Recess diameter: 275 mm Maximum subwoofer depth: 175 mm Maximum magnet diameter: 168 mm
Rockford Fosgate Prime R2-1200X1 is a 1-Channel Amplifier in Class-D topology. It features symmetrical differential inputs with RCA pass-through outputs and a high-level compatible input. The setup includes variable input gain, auto-sense bypass for RAP, C.L.E.A.N. setting, and a top-mounted control panel. Included are an RLC level remote control, a continuously variable on-board punch EQ, and a variable infrasonic filter. The heat sink is made of aluminum die-cast, with short circuit and overcurrent protection, and it complies with CEA-2006 and CE standards. RMS continuous power is 1200 Watts x 1 at 1 Ω, frequency response is 20 Hz to 250 Hz, efficiency is on average greater than 80%, operating voltage is 9 to 16 VDC, dimensions are 49 x 173 x 285 mm. Features 1-Channel Amplifier Class-D topology Symmetrical differential inputs with RCA pass-through outputs High-level input compatible Variable input gain adjustment Auto-sense bypass switch for vehicles with RAP C.L.E.A.N. setting Includes RLC level remote control Variable infrasonic filter Top-mounted control panel Continuously variable on-board punch EQ Short circuit and overcurrent protection CEA-2006 compliant CE compliant Heat sink made of aluminum die-cast Fully adjustable 12 dB/octave high-pass and low-pass Butterworth filters Technical Specifications RMS continuous power 400 Watts x 1 at 4 Ω RMS continuous power 800 Watts x 1 at 2 Ω RMS continuous power 1200 Watts x 1 at 1 Ω Dynamic power 489 Watts x 1 at 4 Ω Dynamic power 889 Watts x 1 at 2 Ω Dynamic power 1389 Watts x 1 at 1 Ω Frequency response 20 Hz to 250 Hz Input sensitivity low-level 150 mV to 4 V Input sensitivity high-level 450 mV to 12 V Efficiency on average greater than 80% Signal input low-level 2 RCA Signal input high-level 4-pin Molex Signal output low-level 2 RCA pass-thru active with RCA or high-level input Sound control 0 to +18 dB at 45 Hz Low-pass 50 Hz to 250 Hz at 12 dB per octave Butterworth Subsonic 15 Hz to 40 Hz at 12 dB per octave Butterworth Remote control Yes Power Cable 20 mm² Speaker Cable 8 mm² Cooling Convection Operating voltage 9 to 16 VDC Recommended Fuse 200 A Maximum current draw 121 A at 13.8 V sine wave Dimensions height 49 mm Dimensions width 173 mm Dimensions depth 285 mm
The Surround Be by Focal is a 2-way AV speaker that seamlessly fits into your home theater. It is ideal for completing a 5.1 system or more complex multi-channel systems like 6.1 or 7.1. This speaker has been designed to authentically reproduce ambient effects as well as intense sound signals like shocks and explosions. Thanks to its discreet design, it can be easily mounted on the wall without overwhelming your living room. Whether you want to enjoy the complexity of film soundtracks or the fine details of immersive sounds, the Surround Be offers you a compelling audio experience. These speakers, made in our workshops, are ideal for completing a 5.1 home theater system or a multi-channel system (6.1, 7.1 ...). They reproduce ambient effects as faithfully as possible as well as loud, intense sound signals like shocks and explosions. They are discreet and easy to install on the wall. They reproduce the complexity of film soundtracks without cluttering the back of your living room. Focal Know-How It features the same Sopra technologies as the Sopra floor-standing speakers, bookshelf speakers, and center speakers: "W" membranes and inverted dome tweeters made of pure beryllium. The result is top-notch HiFi performance with even dispersion, efficiency, and sound richness. Specifications Design Height : 350 mm Width : 430 mm Depth : 190 mm Weight : 12.6 kg Sound - acoustic Product type : 2-way bipolar surround Membrane : W cone Mid : 2 x 6.5 "(16.5 cm) W cone bass/midrange Tweet + TW form : 2 x 1 "(27 mm) pure beryllium inverted dome tweeters Low cut-off frequency (-6 dB) : 59 Hz Frequency response (+/- 3DB) : 72Hz - 40kHz Sensitivity : 91 dB Accessories Tips : Spikes X4
Audison Prima AP 4 is a 4 inch (10 cm) mid-bass driver with a nominal size of 100 mm. The frequency response ranges from 80 to 7.5 kHz, the impedance is 4 Ohm, and the sound pressure level is 91 dB. The power handling is 120 W peak and 40 W continuous. It features a 25 mm voice coil made of pure copper, a water-repellent treated paper cone, and a TPU surround with a flat triple-wave profile. The cone profile was developed using FEM and optimized with the Klippel Scan Vibrometer; developed with the KLIPPEL Suite. The compact basket is coated with an abrasion- and scratch-resistant finish, complemented by a low installation depth. Re 3.2 Ohm, Qts 1, Qes 1.2, and Xmax 1.8 mm are specified. Fs 125 Hz, Vas 1.5 l, Mms 5 g, Cms 0.3 mm/N, and BL 3.4 T m are detailed. Dimensions: A 103 mm, B 93 mm, C 43 mm, D 41 mm; Weight 0.4 kg. Features 4 inch (10 cm) mid-bass driver Size 100 mm Power handling peak 120 W Power handling continuous 40 W Impedance 4 Ohm Frequency response 80 - 7.5 kHz Voice coil 25 mm made of pure copper Water-repellent treated paper cone TPU surround with flat triple-wave profile Compact basket with abrasion-resistant and scratch-resistant coating Low installation depth No passive crossover required thanks to mechanically calibrated low-pass cutoff frequency Cone profile developed via FEM and optimized with Klippel Scan Vibrometer Developed with the KLIPPEL Suite Very wide frequency response and high efficiency Technical specifications Size 100 mm Power handling peak 120 W Power handling continuous 40 W Impedance 4 Ohm Frequency response 80 - 7.5 kHz Voice coil 25 mm Xmax 1.8 mm Qes 1.2 D 85 mm Re 3.2 Ohm Fs 125 Hz Vas 1.5 l Mms 5 g Cms 0.3 mm/N BL 3.4 T m Qms 7.6 Qts 1 Le 0.16 mH SPL 91 dB Weight 0.4 kg Dimension A 103 mm Dimension B 93 mm Dimension C 43 mm Dimension D 41 mm
The Titan TXE500/4 from Hifonics is a 4-Channel Amplifier of Class A/B analog design. The device features screw-mounted RCA jacks, aluminum die-cast side panels, a backlit logo badge, and blue connection terminal lighting. The power ratings are 4 x 80 watts RMS at 4 ohms or 4 x 125 watts RMS at 2 ohms. In bridged mode, it achieves 2 x 250 watts RMS at 4 ohms. The equipment includes high-level inputs with EPS, an automatic turn-on function, and a bass level remote control. The dimensions of the aluminum heat sink are 217 x 57 x 330 mm. Features 4-Channel Amplifier Class A/B analog circuitry Screw-mounted RCA jacks Aluminum die-cast side panels Aluminum heat sink Backlit logo badge Blue connection terminal lighting High-level inputs with EPS (Error Protection System) Automatic turn-on function (Start/Stop ready) Bass level remote control Input selector switch 2/4 CH Dimensions: 217 x 57 x 330 mm Technical Specifications Power: 4 x 80 watts RMS @ 4 ohms Power: 4 x 125 watts RMS @ 2 ohms Power: 2 x 250 watts RMS @ 4 ohms bridged 2 x HPF 10 - 250 Hz LPF 50 - 250 Hz (CH3/4) Bass Boost 0 - 12 dB (CH3/4) Bandpass function (CH3/4)
The Scanspeak Automotive Gold 32W/4878T05 is a 12-inch subwoofer that takes your music experience to a new level. Known for its 13" (32cm) sandwich paper cone and 4 Ohm impedance, this subwoofer guarantees smooth and powerful sound. Equipped with a patented ferrite magnet system and a lossless linear suspension, this model ensures a unique playback quality. With its additional features, such as rubber surround, magnet protection cap with grille in front of the pole core vent, and an aluminum die-cast basket, the listening experience with the Scanspeak Automotive Gold 32W/4878T05 will deliver a new level of clarity and precision. Features Scanspeak Automotive Gold-Series Subwoofer 13" (32cm) sandwich paper cone 4 Ohm impedance Patented ferrite magnet system Lossless linear suspension Rubber surround Magnet protection cap incl. grille in front of the pole core vent Aluminum die-cast basket Xmax ± 14mm Power RMS: 200 Watt Power Max: 550 Watt Fs: 17 Hz Re: 3.1 Ω Qt: 0.32 Sensitivity: 89 dB VAS: 180 ltr. Sd: 526 cm² Bl: 12.5 Tm
Vulcan VX6.2C is a 6.5 inch 16.5 cm Speaker Set from Hifonics as a 2-way component system. It features an RMS power of 100 Watts and a maximum power of 200 Watts. The impedance is 4 Ohms. PP membranes, 25 mm textile tweeters, and a 12 dB inline crossover are integrated. The set includes Grille as well as a cutout of 143 mm and a mounting depth of 58 mm. Version with magnet boot and aluminum sticker. Features 6.5 inch 16.5 cm Speaker Set 2-way component system PP membrane 25 mm textile tweeter 12 dB inline crossover With magnet boot and aluminum sticker Includes Grille Technical Specifications Speaker size: 6.5 inch 165 mm RMS power: 100 Watts Maximum power: 200 Watts Impedance: 4 Ohms Cutout: 143 mm Mounting depth: 58 mm
The Machete MF-15S is a 15-inch Subwoofer from Deaf Bonce in the Machete series. The power handling is 800 Watts RMS and 1600 Watts maximum. It features a dual impedance of 2x2 Ohms and a voice coil size of 2.5 inches. The mounting depth is 179.3 mm with an outer diameter of 372.9 mm. The technical specifications indicate a resonance frequency of 28 Hz and an Xmax of 15 mm. The Subwoofer is designed for use in car audio systems. Features 15-inch (38cm) Subwoofer Manufacturer: Deaf Bonce Power handling: 800 Watts RMS Power handling: 1600 Watts MAX Impedance: 2x2 Ohms Voice coil size: 2.5 inches Mounting depth: 179.3 mm Outer diameter: 372.9 mm Mounting holes: 354 mm Vas: 86.2 liters Technical Data Resonance frequency (FS): 28 Hz RE: 1.8 + 1.8 QTS: 0.68 Xmax: 15 mm Sensitivity: 85.8 dB BL: 16.1
The GA 20SG is a Dome Tweeter from Gladen with a 20 mm voice coil. The diaphragm is made of silk fabric, and the voice coil former is made of Kapton. The detachable plastic housing is designed for installation in original mounting locations. A hexagon grille is included. The impedance is 4 Ohms. Features Dome Tweeter Size: 20 mm (voice coil) Diaphragm: silk fabric Voice coil former: Kapton Detachable plastic housing for installation in original mounting locations Hexagon grille Impedance: 4 Ohms
